How to clean window and door mosquito screens without using water pressure in 4 simple steps
Read more
Aaj Tak
www.aajtak.in

How to clean window and door mosquito screens without using water pressure in 4 simple steps

As Diwali approaches, many people are preparing to tidy up their homes, and cleaning the screens on doors and windows is an important part of this process. Often, people clean floors, fans, and the windows themselves, but they avoid cleaning metal screens from accumulated dust and dirt because it takes a lot of time. Sometimes people try to wash the screens with hose water, but this only temporarily improves the appearance, as a thick layer of grime forms on them again, spoiling the look of a clean home.

Especially near the kitchen, sticky grease and smoke accumulate on the screens. Cleaning such screens usually takes many hours and effort. However, if you think that expensive cleaning agents are needed for this task, you are mistaken. With ordinary hot water, detergent, and liquid soap available at home, you can easily clean a dirty screen without extra effort.

To clean a metal screen on a door or window, you will need some common items that are easy to find at home.

Due to the accumulation of dust, dirt, and grease, cleaning a metal screen becomes a difficult task. In this case, a solution of hot water and detergent will help loosen the grime. First, you need to fill a basin with enough hot water that can be used safely, provided the water is not too hot.

Next, add a little washing powder and liquid dish soap to the water and mix thoroughly. Then, wet a sponge or soft cloth in this solution and gently apply it to the screen, trying to clean every part of it.

After applying the solution, leave it for about 10–15 minutes so that the settled dust and grease become soft. After that, carefully scrub the screen with a sponge or a soft brush. This will allow the dirt to come off easily, and you won't have to exert excessive effort.

After finishing the cleaning, wipe the screen with a clean, slightly damp cloth to remove any soap and detergent residue. Then, dry the screen completely with a dry cloth. It is important to avoid prolonged contact of water with the metal screen, as this increases the risk of rust.

When cleaning a metal screen, avoid scrubbing hard. If the screen is painted, test the solution on a small area first to minimize the risk of paint damage. Furthermore, if there is already rust or peeling paint on the screen, simple soap and water may not be enough to completely eliminate the problem.

It should also be remembered that you should not use excessively hot water for cleaning, and when working with the screen, you must protect adjacent wooden doors or electrical switches from getting wet.

By applying this simple method, you can clean regular dirt from door and window screens before Diwali. This will make the house cleaner and save you unnecessary hassle in preparing for the holiday.

Similar stories

Ways to clean a kitchen hood from grease and smoke without disassembly
Read more
www.aajtak.in

Ways to clean a kitchen hood from grease and smoke without disassembly

Daily cooking leads to smoke and grease released during preparation making the inside of the kitchen hood very dirty and sticky. A thick layer of grease accumulates on the hood filters, which makes it difficult or cumbersome to remove or disassemble.

If you want to clean the hood without removing or disassembling it, you can use several simple home methods. This will save effort, and the hood will look brand new.

To begin, you need to prepare the ingredients: two tablespoons of caustic or baking soda, one tablespoon of vinegar or lemon juice, one cup of boiling hot water (in a large pot or cauldron), dish soap, an old brush, as well as a bucket or spray bottle.

For a quick cleaning, place a large pot under the hood, pour water, vinegar, and baking soda (or caustic soda) into it, and bring it to a boil. Then turn on the gas stove and set the hood to high speed. The steam from the boiling water, entering the hood, will help melt the stubborn greasy dirt that has built up over months, which will start dripping down.

Next, prepare a solution by mixing hot water, a little dish soap, and vinegar in a spray bottle. This solution must be thoroughly sprayed onto the filters and external parts of the hood, leaving it for 10–15 minutes to soften the grease.

After this, the internal and external surfaces of the hood should be carefully wiped with a damp cotton cloth or microfiber. For cleaning hard-to-reach places, you can use an old toothbrush. Finish the process by wiping the hood with a dry clean cloth so that it dries completely. In this way, the hood will become shiny without requiring disassembly or removal of parts.

Popular