308-wheel 'Mahabali' truck has not reached its destination in six months while transporting heavy equipment
Read more
Aaj Tak
www.aajtak.in

308-wheel 'Mahabali' truck has not reached its destination in six months while transporting heavy equipment

Currently, the massive 308-wheel 'Mahabali' truck is attracting attention on the streets of Uttar Pradesh. This giant vehicle carries a machine weighing 164.28 metric tons, which is being transported from Belgium to Lakhimpur Kheri. The machine, approximately 41 meters long, is destined for the biopolymer plant located in Kumbhi, owned by the Balrampur sugar mill.

Despite the journey having been underway for several months, the 'Mahabali' has yet to reach its final destination.

The transport of this massive equipment began in April in Belgium. The machine was shipped to India by sea and, after about a month at sea, arrived at Paradeep port in Odisha. It was then loaded onto the specialized 308-wheel truck, which set off towards Lakhimpur Kheri, Uttar Pradesh.

After leaving Paradeep, the 'Mahabali' truck traveled through the states of Jharkhand and Bihar to reach Uttar Pradesh. Due to its enormous size and significant weight, it could not travel at high speeds like ordinary vehicles. Obstacles related to height, width, and road conditions arose along the way.

On September 25, the giant truck entered the jurisdiction of Chandawli district, Uttar Pradesh. Difficulties arose with further movement near National Highway-19, close to the ring road in the Pandit Dindyal Upadhyay area. The reason was that the height and width of the truck and its cargo did not match the roadway.

In this situation, the team of logistics experts received permission from relevant departments and officials to organize an alternative route. Equipment, including excavators, was brought in place to facilitate this. After the road was prepared on Tuesday afternoon, the 'Mahabali' truck continued its journey towards Varanasi.

People are showing great interest in the passing 'Mahabali' truck. When news spread about the truck's halt in Chandawli, people from surrounding villages and from afar headed to the site. Many took photos with the giant truck and the machine on it. Several content creators also arrived at the scene to film videos. The 308 wheels and the colossal size of the truck most impressed the people.

According to logistics manager Aneek Bharti, the truck is planned to reach Lakhimpur via Gajipur, Gorakhor, and the Purvanchal expressway. Road obstacles are being resolved by obtaining permissions from the relevant authorities. The logistics team reports that if the journey proceeds according to plan, the 'Mahabali' truck will require another two to three weeks to reach Lakhimpur Kheri.

A reactor is being transported on this huge truck. The logistics manager clarified that the machine is heading to the biopolymer plant but declined to provide more detailed technical information. The Chandawli police reported that the machine is about 41 meters long and weighs 164.28 metric tons. It is being transported for a bioplastic plant being built by the Balrampur sugar mill in the village of Kumbhi, Lakhimpur Kheri. Thus, the journey, which started in Belgium, continues on the roads after arriving in India by sea. The 308-wheel 'Mahabali' truck has crossed many states and complex routes, but it still has a way to go to its final destination in Lakhimpur Kheri.

Similar stories

308-wheel truck from Belgium arriving in UP caused bridge closure and gathered crowds
Read more
www.aajtak.in

308-wheel truck from Belgium arriving in UP caused bridge closure and gathered crowds

A massive truck with 308 wheels, traveling from Belgium, reached the Chandawli area in UP, where it became the focus of public attention. This giant vehicle, which was shipped from Belgium to Urissa by sea, was heading to Lakhimpur Kheri for installation at a bioplastic production complex in Kumbhi.

The truck crossed the state border of Uttar Pradesh through the territories of Jharkhand and Bihar, attracting a large number of local residents who wanted to see this unusual machine. Police and specialists were deployed to ensure the safe movement of such a huge vehicle, manage traffic, and remove obstacles, including a pedestrian bridge.

The machine mounted on the 308-wheel truck was imported from Belgium. It first arrived at the port of Urissa by sea and then traveled along roads through Jharkhand and Bihar to reach Lakhimpur in UP. A plant for producing bioplastics is planned to be launched at this site in Kumbhi, where this large equipment will be used.

As soon as the truck arrived in Chandawli, a huge crowd gathered on the highway, attracted by the spectacle. Local residents came after seeing videos circulating on social media, starting from Urissa. Police personnel were deployed under the direction of Deputy Commissioner of Traffic Krishna Murari Sharma to control the crowd and ensure the unimpeded progress of the truck.

Due to the significant height of the truck, various pedestrian bridges and billboards along the route presented obstacles. A hydraulic machine was used to lift the billboards, and two large cranes were required to raise the pedestrian bridge. Both sections of the pedestrian bridge were dismantled and lifted by the crane, allowing the truck to pass safely underneath.

Furthermore, more than two dozen similar obstacles were removed along the route from Urissa to Lakhimpur to facilitate the truck's movement. According to the crane operator, there are also more than half a dozen such obstacles remaining on the route to Lakhimpur, the responsibility for lifting and removing which lies with their company.

Popular