JBL offers a variety of headphones that meet distinct needs, ranging from small TWS models to noise-canceling headphones and options designed for physical exercise.
In 2026, the product line incorporates advanced technologies such as adaptive ANC, multipoint connectivity, high-bitrate codecs, and various levels of water resistance. Tecnoblog details the ten best models from the brand below, presenting their strengths and weaknesses.
JBL Tour One M3 Smart Tx
The JBL Tour One M3 is an over-ear headphone equipped with 40mm drivers and compatible with SBC, AAC, and LDAC codecs. The LDAC codec allows audio transmission up to 24-bit/192 kHz, provided the receiving device is compatible. A highlight of this model is the included transmitter, which enables receiving audio from external sources and retransmitting it via Auracast, expanding its use with TVs, computers, and other compatible devices.
This headphone features adaptive noise cancellation, using ten microphones to capture and process external sounds. Its battery life is 70 hours without active cancellation and 40 hours with ANC on. Weighing 278g, it offers USB-C or P2 connection options, serving as an alternative to Bluetooth for suitable equipment. Supported codecs include SBC, AAC, LDAC, and LC3.
JBL Tour Pro 3
The JBL Tour Pro 3 is an in-ear headphone that uses two types of drivers on each side: a 10.2mm dynamic driver for mid and low frequencies, and another dedicated to higher frequencies. This configuration allows different frequency ranges to be treated independently, instead of relying on a single component for the entire signal.
Another notable feature is the charging case, which functions as an audio transmitter when connected to an external source, sending the signal to the headphones. The model supports advanced codecs such as Hi-Res, LDAC, and LC3, provided the device is compatible. Battery life reaches 11 hours on the headphones without ANC, totaling 44 hours with the case; with cancellation active, the duration on the headphones is up to 8 hours. It operates with Bluetooth 5.3 and offers spatial audio with head tracking. Supported codecs are SBC, AAC, LDAC, and LC3.
The Live Pro 2 TWS is an in-ear model that features adaptive noise cancellation, multipoint function, and wireless charging. Its 11mm dynamic drivers cover the entire frequency range, while six microphones assist in call system and ambient sound control. Connectivity is less modern than that of JBL's newer Tour models, using Bluetooth 5.2 with SBC and AAC codecs, sufficient for standard Bluetooth transmission but without LDAC support.
A positive aspect of the Live Pro 2 TWS is its battery life of up to 40 hours, including case recharges. The headphones can be used for up to 10 hours without ANC, and with cancellation on, the individual autonomy drops to approximately eight hours, according to JBL. Supported codecs are SBC and AAC.
For users who prioritize stability during physical activities, the Endurance Peak 4 differs from traditional fully in-ear headphones by having a support that fixes to the ear area. This model combines 10mm dynamic drivers with adaptive noise cancellation, allowing the user to switch between reducing external sounds or maintaining environmental awareness. It uses Bluetooth 5.4 with basic codec support. Resistance is a crucial point, as the headphones have an IP68 certification against dust and water, surpassing other models on this list. Autonomy reaches 12 hours without ANC and 8 hours with ANC on, reaching 48 hours with case recharges, according to the brand. Supported codecs are SBC and AAC.
The Live 780NC is an over-ear headphone featuring 40mm dynamic drivers, Bluetooth 6.0 connectivity, and support for Hi-Res and advanced codecs like LDAC and LC3. The inclusion of LDAC is advantageous for those with a compatible device, as it allows for a higher data rate transmission compared to basic codecs. Battery life is a major differentiator for this model in the JBL line: it offers up to 80 hours of playback without ANC and 50 hours with active cancellation. According to JBL, five minutes of charging adds up to four hours of playback. Supported codecs are SBC, AAC, LDAC, and LC3.
The Endurance Race 2 adopts a different approach from the Peak 4. Instead of an external hook, it uses tips and a fixing expander to help maintain positioning during movement. The set integrates 6.8mm dynamic drivers, ANC, Ambient Aware, and TalkThru, allowing the user to choose between reducing external noise or hearing the environment. With Bluetooth 5.3, the model operates with SBC and AAC, codecs intended for conventional transmission, without support for higher bitrate formats like LDAC. Autonomy reaches 12 hours on the headphones without ANC and 10 hours with cancellation on, reaching 48 and 40 hours, respectively, with the case. The Endurance Race 2 has an IP68 certification for complete protection against dust and freshwater immersion. Supported codecs are SBC and AAC.
The Vibe Beam 2 represents a simpler option in the JBL earbud line, offering 8mm dynamic drivers and noise cancellation, but without support for advanced codecs like LDAC. The Bluetooth 5.3 connection uses SBC and AAC codecs. According to JBL, each earbud weighs 4.3g and provides up to 10 hours of playback without ANC or eight hours with the feature activated. Including the case, the autonomy reaches 40 hours without ANC and 32 hours with cancellation. The model has four microphones for calls and features an IP54 certification, protecting against dust and splashes. Supported codecs are SBC and AAC.
The Soundgear Clips uses an open-ear clip design, keeping the auditory canal free. The technology employs air conduction to direct audio to the ears, while the speaker placement aims to minimize sound leakage. Thus, this JBL headphone is ideal for those who need to be aware of their surroundings during travel, work, or other activities where acoustic isolation is not the priority. The model uses an 11mm dynamic driver, Bluetooth 5.4, and SBC and AAC codecs. It offers up to eight hours of playback on the headphones and 32 hours considering case charges. The set also includes multipoint, four microphones for calls, and IP54 certification against dust and splashes. Supported codecs are SBC and AAC.
The Wave Buds 2 concentrates noise cancellation features in a compact and accessible format. Its 8mm dynamic drivers operate with ANC and Ambient Aware, and the JBL app allows adjustments to audio settings. The Bluetooth 5.3 connection uses common standards in mobile devices, but there is no support for LDAC or another higher bitrate codec. For calls, the model integrates microphones and features such as TalkThru and Voice Aware. Autonomy is up to 10 hours on the headphones without ANC and eight hours with the feature active. With the case, the times reach 40 and 32 hours, respectively. Each earbud weighs about 4.5g and has basic IP54 certification against water and dust. Supported codecs are SBC and AAC.
