September 12, 01:55Tecnoblog

Analysis of the 10 best JBL headphones to buy in 2026

JBL offers a variety of headphones that meet distinct needs, ranging from small TWS models to noise-canceling headphones and options designed for physical exercise.

In 2026, the product line incorporates advanced technologies such as adaptive ANC, multipoint connectivity, high-bitrate codecs, and various levels of water resistance. Tecnoblog details the ten best models from the brand below, presenting their strengths and weaknesses.

JBL Tour One M3 Smart Tx

The JBL Tour One M3 is an over-ear headphone equipped with 40mm drivers and compatible with SBC, AAC, and LDAC codecs. The LDAC codec allows audio transmission up to 24-bit/192 kHz, provided the receiving device is compatible. A highlight of this model is the included transmitter, which enables receiving audio from external sources and retransmitting it via Auracast, expanding its use with TVs, computers, and other compatible devices.

This headphone features adaptive noise cancellation, using ten microphones to capture and process external sounds. Its battery life is 70 hours without active cancellation and 40 hours with ANC on. Weighing 278g, it offers USB-C or P2 connection options, serving as an alternative to Bluetooth for suitable equipment. Supported codecs include SBC, AAC, LDAC, and LC3.

JBL Tour Pro 3

The JBL Tour Pro 3 is an in-ear headphone that uses two types of drivers on each side: a 10.2mm dynamic driver for mid and low frequencies, and another dedicated to higher frequencies. This configuration allows different frequency ranges to be treated independently, instead of relying on a single component for the entire signal.

Another notable feature is the charging case, which functions as an audio transmitter when connected to an external source, sending the signal to the headphones. The model supports advanced codecs such as Hi-Res, LDAC, and LC3, provided the device is compatible. Battery life reaches 11 hours on the headphones without ANC, totaling 44 hours with the case; with cancellation active, the duration on the headphones is up to 8 hours. It operates with Bluetooth 5.3 and offers spatial audio with head tracking. Supported codecs are SBC, AAC, LDAC, and LC3.

The Live Pro 2 TWS is an in-ear model that features adaptive noise cancellation, multipoint function, and wireless charging. Its 11mm dynamic drivers cover the entire frequency range, while six microphones assist in call system and ambient sound control. Connectivity is less modern than that of JBL's newer Tour models, using Bluetooth 5.2 with SBC and AAC codecs, sufficient for standard Bluetooth transmission but without LDAC support.

A positive aspect of the Live Pro 2 TWS is its battery life of up to 40 hours, including case recharges. The headphones can be used for up to 10 hours without ANC, and with cancellation on, the individual autonomy drops to approximately eight hours, according to JBL. Supported codecs are SBC and AAC.

For users who prioritize stability during physical activities, the Endurance Peak 4 differs from traditional fully in-ear headphones by having a support that fixes to the ear area. This model combines 10mm dynamic drivers with adaptive noise cancellation, allowing the user to switch between reducing external sounds or maintaining environmental awareness. It uses Bluetooth 5.4 with basic codec support. Resistance is a crucial point, as the headphones have an IP68 certification against dust and water, surpassing other models on this list. Autonomy reaches 12 hours without ANC and 8 hours with ANC on, reaching 48 hours with case recharges, according to the brand. Supported codecs are SBC and AAC.

The Live 780NC is an over-ear headphone featuring 40mm dynamic drivers, Bluetooth 6.0 connectivity, and support for Hi-Res and advanced codecs like LDAC and LC3. The inclusion of LDAC is advantageous for those with a compatible device, as it allows for a higher data rate transmission compared to basic codecs. Battery life is a major differentiator for this model in the JBL line: it offers up to 80 hours of playback without ANC and 50 hours with active cancellation. According to JBL, five minutes of charging adds up to four hours of playback. Supported codecs are SBC, AAC, LDAC, and LC3.

The Endurance Race 2 adopts a different approach from the Peak 4. Instead of an external hook, it uses tips and a fixing expander to help maintain positioning during movement. The set integrates 6.8mm dynamic drivers, ANC, Ambient Aware, and TalkThru, allowing the user to choose between reducing external noise or hearing the environment. With Bluetooth 5.3, the model operates with SBC and AAC, codecs intended for conventional transmission, without support for higher bitrate formats like LDAC. Autonomy reaches 12 hours on the headphones without ANC and 10 hours with cancellation on, reaching 48 and 40 hours, respectively, with the case. The Endurance Race 2 has an IP68 certification for complete protection against dust and freshwater immersion. Supported codecs are SBC and AAC.

The Vibe Beam 2 represents a simpler option in the JBL earbud line, offering 8mm dynamic drivers and noise cancellation, but without support for advanced codecs like LDAC. The Bluetooth 5.3 connection uses SBC and AAC codecs. According to JBL, each earbud weighs 4.3g and provides up to 10 hours of playback without ANC or eight hours with the feature activated. Including the case, the autonomy reaches 40 hours without ANC and 32 hours with cancellation. The model has four microphones for calls and features an IP54 certification, protecting against dust and splashes. Supported codecs are SBC and AAC.

The Soundgear Clips uses an open-ear clip design, keeping the auditory canal free. The technology employs air conduction to direct audio to the ears, while the speaker placement aims to minimize sound leakage. Thus, this JBL headphone is ideal for those who need to be aware of their surroundings during travel, work, or other activities where acoustic isolation is not the priority. The model uses an 11mm dynamic driver, Bluetooth 5.4, and SBC and AAC codecs. It offers up to eight hours of playback on the headphones and 32 hours considering case charges. The set also includes multipoint, four microphones for calls, and IP54 certification against dust and splashes. Supported codecs are SBC and AAC.

The Wave Buds 2 concentrates noise cancellation features in a compact and accessible format. Its 8mm dynamic drivers operate with ANC and Ambient Aware, and the JBL app allows adjustments to audio settings. The Bluetooth 5.3 connection uses common standards in mobile devices, but there is no support for LDAC or another higher bitrate codec. For calls, the model integrates microphones and features such as TalkThru and Voice Aware. Autonomy is up to 10 hours on the headphones without ANC and eight hours with the feature active. With the case, the times reach 40 and 32 hours, respectively. Each earbud weighs about 4.5g and has basic IP54 certification against water and dust. Supported codecs are SBC and AAC.

Similar stories

tecnoblog.netSeptember 12, 01:19

Review of the Best Headphones of 2026: 10 Models to Buy in Brazil

The choice of ideal headphones depends on your budget. Premium models offer advanced noise cancellation, enhanced comfort, and high sound quality, despite their higher cost. At the same time, more affordable options suit those looking for versatile headsets for daily use, featuring long battery life and good sound at lower prices.

Tecnoblog presents a list of ten best headphone models currently available, describing the pros and cons of brands such as Apple, Bose, AKG, Sony, JBL, Anker Soundcore, and QCY.

AirPods Max 2

The AirPods Max 2 are over-ear headphones weighing 384g, distinguished by a rich set of features for those striving for the most complete audio experience. Active Noise Cancellation (ANC) is 1.5 times more effective compared to the previous model, thanks to the H2 chip and new processing algorithms, according to Apple. Furthermore, the new high dynamic amplitude amplifier works with the drivers to ensure more detailed sound reproduction. The headphones support lossless streaming and low latency via USB-C, which is useful for listening to high-quality music or watching videos without audio-visual desynchronization. The battery lasts up to 20 hours with ANC and Spatial Audio enabled. AirPods Max 2 are also compatible with Live Translation, based on Apple Intelligence. Supported codecs: AAC and ALAC.

Sony WH-1000XM6

The Sony WH-1000XM6 over-ear headphones (254g) are equipped with adaptive ANC, 12 microphones, and algorithms that adjust noise reduction in real-time. There is also an automatic ambient sound mode to balance played music with external sounds. A 30mm diameter driver is designed to provide clear and crisp sound, especially in high frequencies. Support for high-resolution audio (wired and wireless) and spatial audio enhances the overall sound experience. Battery life is 30 hours with ANC on, and up to 40 hours without it. A drawback is the charging time: a full charge takes 3 hours and 30 minutes. Supported codecs: SBC, AAC, LDAC, and L3.

Bose QuietComfort Ultra Gen 2

The Bose QuietComfort Ultra Gen 2 are over-ear headphones weighing 260g, distinguished by their active noise cancellation (ANC). The user can customize this feature through the Bose app or completely disable it to adapt the experience to a specific environment. One of the main innovations is the wired connection via USB-C, which allows for lossless audio playback. This connection also provides low latency, which may be relevant for gamers or video watchers. The battery lasts up to 30 hours on a single charge, and up to 45 hours with ANC off. The model supports Bluetooth 5.3 and multipoint connection, allowing simultaneous connection to two devices. Supported codecs: SBC, AAC, and aptX Adaptive.

AKG K361-BT

The AKG K361-BT are professional headphones aimed at artists, podcasters, and beatmakers. They do not have ANC, as they are designed for studio and closed-room use. Nevertheless, their oval earcups provide passive sound insulation for better immersion. 50mm drivers deliver advanced performance and extended bass, with a frequency range from 15 Hz to 28 kHz. Oxygen-free pure copper coils optimize acoustic accuracy to improve bass, mids, and highs. The battery promises 24 hours of wireless operation (with Bluetooth 5.0). Operation can continue using a cable if the battery runs out. Supported codecs: SBC and AAC.

JBL Tour One M3 Tx

The JBL Tour One M3 Tx weighs 278g and features adaptive ANC 2.0 with real-time adjustment. Eight microphones (four in each earcup) are used to capture ambient noise, which is then fed back out of phase to enhance isolation from external sounds. Thanks to 40mm drivers, the headphones support high-resolution wireless audio (Bluetooth 5.3) for high-quality sound. You can also enjoy lossless sound, but only in wired mode (USB-C). The battery impresses with up to 70 hours of autonomy with ANC off. A distinctive feature is the Smart Tx device—a small transmitter with a display that activates wireless audio playback on cable-only devices. Supported codecs: SBC, AAC, LDAC, and LC3.

The Live 780NC is also an over-ear model with adaptive ANC 2.0. However, it uses six microphones for precise background noise filtering, which is two fewer than the JBL Tour One M3 Tx. This wearable gadget weighs 260g, has a 40mm driver, and supports high-resolution audio both wired and wirelessly. It also supports multipoint connection using the latest Bluetooth 6.0 standard. Battery life reaches 50 hours with ANC and increases to 80 hours without noise cancellation. Although the device is compatible with Smart Tx, the audio transmitter itself is not included in the package. Supported codecs: not specified.

Anker Soundcore Q31i

The Anker Soundcore Q31i are over-ear headphones weighing 265g with adaptive ANC. Although noise cancellation only functions when connected by cable, it is capable of adapting to changes in seal caused by movement, glasses, or hair. The driver features a dual diaphragm and reaches up to 98 dB, combining metal-ceramic and silk for optimized bass and treble. To further improve sound quality, the headphones support high-resolution audio (wired and wireless) and spatial sound. Multipoint connection (with Bluetooth 6.0) and a battery with up to 80 hours of autonomy (without ANC) complete the technical specifications of this wearable device. Supported codecs: AAC, SBC, and LDAC.

QCY H3 Pro ANC

The QCY H3 Pro ANC has an over-ear design weighing 231 grams. The headphones feature adaptive ANC up to 50 dB and use three AI microphones to reduce noise during calls. 40mm dynamic drivers are designed to deliver rich bass and clear highs. Hi-Res Audio and Hi-Res Audio Wireless certifications guarantee compatibility with high-resolution audio both wired and wireless. The headphones operate for about 40 hours with ANC and up to 55 hours without noise cancellation. Multipoint connection is also provided for simultaneous pairing with two devices via Bluetooth 5.4. Supported codecs: AAC, SBC, and LDAC.

JBL Tune 720BT

The JBL Tune 720BT (220g) is a more basic over-ear headset focused on long usage time. Since the peripheral does not have active noise cancellation, protection against external noise is provided only by the earcups, which perform a passive function. The headphones are equipped with 40mm drivers and offer preset equalization modes via the JBL Headphones app. However, they do not support high-resolution audio or spatial sound. The main advantage of this model is the battery, which can last up to 76 hours. Furthermore, charging for just 5 minutes provides an additional 3 hours of listening time. Supported codecs: not specified.

tecnoblog.netSeptember 8, 14:08

Review of 10 Best Sweat and Noise Resistant Headphones for Workouts in 2026

Workout headphones must possess stability during exercises, sweat resistance, and noise reduction functionality, in addition to other important characteristics.

In this guide, Tecnoblog has selected 10 models from brands such as JBL, Anker, Samsung, Apple, and QCY. The presented devices include in-ear, open-type, and bone conduction headphones. The review examines the advantages and disadvantages of each model.

JBL Endurance Peak 4

The JBL Endurance Peak 4 model is designed specifically for sports activities and uses hooks for additional in-ear stabilizer support. Each earbud weighs 10.5 g, and the design has an IP68 certification, ensuring protection against dust and sweat during use.

Audio is reproduced by 10 mm dynamic drivers and features adaptive active noise cancellation, which isolates the user from external sounds. In workouts where it is necessary to hear what is happening around, Ambient Aware and TalkThru modes replace ANC isolation. Thanks to Bluetooth 5.4, multi-point connectivity support, and six microphones, the model also allows equalizer customization via the proprietary application.

Battery life is 12 hours with ANC off or eight hours with the function on. Including recharges from the case, the total operating time reaches 48 hours, according to JBL.

The Endurance Race 2 is equipped with a stabilizer that rests on the inner part of the ear for better in-ear fit during training. The TwistLock system secures the headphone position, and the IP68 certification protects against water and dust. The dynamic drivers are 6.8 mm; the model combines ANC with Ambient Aware and TalkThru, allowing you to either reduce external noise or retain ambient sounds. The JBL app offers six sound settings for different types of exercises. It is also equipped with four microphones, Bluetooth 5.3, and multi-point connectivity. The Endurance Race 2 can operate for up to 12 hours, and up to 48 hours with the case when ANC is off. With noise cancellation enabled, music playback lasts up to 10 hours.

Sport X20 uses a different mounting method: ear hooks that can be extended up to 4 mm and rotated up to 30 degrees. This allows adjusting the headphone position before or during use while the earbuds remain in contact with the ear canal. Water and dust protection is ensured by the IP68 classification and SweatGuard technology, which protects internal components from corrosion and sweat damage. For calls, the device has six AI-processed microphones, along with Bluetooth 5.3, multi-point connectivity, and physical controls. Its acoustic system uses 11 mm dynamic drivers and includes active noise cancellation and transparency mode. The manufacturer states up to 12 hours of playback in normal mode, and up to 48 hours with the case. These figures decrease to seven and 28 hours, respectively, when using ANC.

AeroFit 2 Pro

The AeroFit 2 Pro allows switching between two usage modes: open-type, which leaves the ear canal free, or semi-in-ear for activating noise cancellation. Each unit weighs 10.4 g and has an IP55 certification against water and dust.

Sound is provided by 11.8 mm drivers supporting Hi-Res audio and AAC, SBC, and LDAC codecs; the latter is compatible with Android devices. The model also supports spatial audio with head tracking, four AI-processed microphones, Bluetooth 6.1, and multi-point connectivity.

Battery life depends on the chosen format: in open-ear mode, it reaches seven hours on a single charge and 34 hours with the case; in noise cancellation mode, it is five hours in the earbuds and 24 hours in total.

AirPods Pro 3

AirPods Pro 3 are aimed at users who train using an iPhone or Apple Watch, integrating fitness-related functions such as heart rate monitoring during exercise. The model weighs 5.55 g per unit and has an IP57 certification for both the earbuds and the case.

The H2 chip handles sound processing with Active Noise Cancellation, Adaptive Audio, Transparency Mode, and Personalized Spatial Audio with dynamic head tracking. The headphones use Bluetooth 5.3.

Apple's headphones battery life reaches eight hours of audio with ANC, but drops to 6.5 hours when using heart rate monitoring during workouts. With the case, up to 24 hours are available with noise cancellation enabled, and five minutes of charging provides about an hour of listening time.

Galaxy Buds 4 Pro

Galaxy Buds 4 Pro feature an in-ear format, weigh 5.1 g per side, and have an IP57 certification, making them suitable for workouts due to protection against dust, sweat, and water. The model is also equipped with pressure, proximity, touch, motion, and voice capture sensors to enhance accessibility.

The acoustic design includes two drivers per side—a woofer and a tweeter—with two dedicated amplifiers. Samsung Seamless Codec (SSC) supports up to 24-bit/96 kHz audio on Galaxy devices and includes Adaptive ANC, Audio 360, LE Audio, and Bluetooth 6.1.

With noise cancellation enabled, battery life reaches six hours in the earbuds and 26 hours including the case. Without ANC, they last up to seven hours on a charge and 30 hours in total.

OpenMove is a bone conduction headphone that transmits vibrations through the temple area, leaving the ears open. For exercising in places where perceiving external sounds is important, this format eliminates the physical isolation of in-ear headphones. The entire structure weighs 29 g and uses Bluetooth 5.1 for wireless connection, along with two equalizer modes, multi-point connectivity support, and noise-canceling microphones for calls. The IP55 rating indicates resistance to sweat and splashes but is not intended for immersion.

During use, the battery provides up to six hours of playback on a single charge, and charging is done via a USB-C port.