Maintaining cleanliness in the home is a daily task, and the bathroom is no exception. However, when cleaning, many people limit themselves to simply wiping the floor with a cleaning agent. While this removes surface dust, it does not cope with ingrained layers of soap, white water marks, and dirt accumulated between tiles. This is why after frequent cleaning, the bathroom floor covering can look dull and dirty.
Since the bathroom floor constantly comes into contact with water, soap, shampoo, hair, and dust, constant humidity contributes to the accumulation of dirt and darkening of tile grout. Therefore, instead of using the same cleaning agent for all types of dirt, applying various home remedies may be more effective.
For removing ingrained dirt
If the floor covering has not been properly cleaned for a long time and a layer of dirt has formed on the tiles, baking soda can be used. First, slightly wet the floor, then evenly sprinkle baking soda over it. Leave the mixture for 15–20 minutes, then scrub with a brush or scraper and rinse thoroughly with water. Thanks to its slight roughness, baking soda helps loosen and remove stuck particles of soap and dirt.
To eliminate white water marks
After drying, white spots may appear on the floor, especially if hard water is used. These marks are difficult to remove with regular washing. It is recommended to mix white vinegar with warm water in equal proportions. Apply the resulting solution to the floor, leave it for a few minutes, and then rinse with clean water. This will help eliminate mineral deposits left by the water.
How to clean darkened tile grout
Dirt, soap, and moisture accumulate between tiles, leading to the darkening of these narrow lines even after washing the floor. For this purpose, prepare a thick paste from baking soda and a small amount of water. Apply this paste to the grout line and gently scrub with an old toothbrush. After that, rinse off the residue with water. The small and stiff bristles of the toothbrush allow easy access to tight spots.
To remove greasy soap film
Around the shower area, a smooth, sticky layer of soap often forms, making the tiles dull even after regular washing. To combat this, dishwashing liquid can be used. Mix a little dishwashing liquid with warm water and wash the floor thoroughly. Let the solution sit for some time, and then rinse with clean water. Dishwashing liquid effectively breaks down fatty layers.
The importance of disinfection after cleaning
Constant humidity in the bathroom requires not only cleaning but also disinfection. A solution made from water and hydrogen peroxide can be used to clean tiles and grout. However, before using any cleaning product, you must check the type of floor covering to ensure that hydrogen peroxide is suitable for it.
Final touch-up with a microfiber mop
To prevent water streaks or fabric lint from appearing after washing, it is recommended to finish the process by drying with a microfiber mop. Microfiber excellently absorbs excess moisture and fine dust without leaving extra marks, allowing the tiles to look clean and shiny.