Ways to clean kitchen ceiling fans from grease and dirt using homemade remedies

When cooking at home, smoke and grease gradually settle on the hood filters, making them dirty and sticky. If cleaning is not performed in a timely manner, the hood's performance begins to decrease. Although there are expensive chemical cleaners with a strong odor, you can clean a dirty and sticky hood to like-new condition using ordinary items found in the kitchen.

Below are simple methods for cleaning the hood. First, you need to turn off the main switch of the hood, then open the locks and carefully remove the aluminum or baffle filter.

Take a large container or basin into which the filters can be completely submerged. Add baking soda (3-4 tablespoons), white vinegar (half a cup), dish soap (2-3 tablespoons), and lemon juice (2 tablespoons, optional) to this hot water. A light foam will appear when adding the ingredients to the water.

Submerge the dirty filters in this hot solution and leave them for two to three hours. This will allow old accumulations of grease and oil to soften and detach.

After the time is up, remove the filters. Then take an old toothbrush or sponge, apply a little dish soap and baking soda to it, and gently scrub the edges and mesh of the filter. Stubborn grease will begin to come off easily.

After cleaning, thoroughly rinse the filters with cool or plain clean water to remove all soap residue and dirt. Wipe the clean filters with a dry cloth or let them dry for a while under the sun or in front of a fan. When the filters are completely dry, reinstall them in the hood, and it will start to shine like new again.

When cleaning the house, people usually pay a lot of attention to the floor, kitchen, bathroom, and furniture, but there are many other items that often go unnoticed. These items include the switches installed on the walls. People either forget to clean the switches or do not know how to do it correctly.

When switches are installed in a home new, they look perfectly clean and shiny. However, due to daily use, the accumulation of dust and grease from the kitchen, they gradually start to look yellow, sticky, and dirty.

When switches become heavily soiled, it is difficult for people to understand how to restore their original shine. Often in such cases, people buy expensive cleaning agents, but it turns out that you do not necessarily have to spend money to make them shine. Some common products available in your kitchen can significantly simplify the process of cleaning switches. Below are seven remedies that can help restore cleanliness to old and dirty switches.

1. Removing Stubborn Dirt with Baking Soda: Baking soda is considered an excellent agent not only for baking but also for household cleaning. It can be used to clean switches. Mix baking soda with a small amount of water to form a thick paste. Then gently rub the switch with a soft cloth or an old toothbrush to remove accumulated dirt and stains.
2. White Vinegar for Removing Grease: If grease or lubricant has accumulated on the switch, white vinegar will help. Dampen a clean cloth with a small amount of vinegar and carefully wipe the switch, which will facilitate the removal of contaminants.
3. Lemon Juice as an Effective Agent: Lemon juice functions as a natural cleaner. To reduce light stains and yellowing, do not apply it directly to the switch; first, apply a little lemon juice to a cloth, and then use it to clean.
4. Gentle Cleaning with Salt: You can also clean the switch using salt. Salt can be used as a mild abrasive. It helps loosen ingrained residue. It is advisable to try using salt in combination with lemon or vinegar.
5. Removing Stickiness with Dish Soap: Dish soap is useful not only for dishes but also for cleaning switches. Add a few drops to water and wipe the switch with a slightly damp cloth, which will help reduce greasiness.
6. Restoring Shine with Toothpaste: White toothpaste can also be used for cleaning. Apply a little toothpaste and gently scrub with a soft brush, then wipe with a clean cloth to lighten old spots.
7. Corn Starch for Oil Absorption: If a lot of grease has accumulated on the switch, corn starch can be helpful. It is considered an agent that helps absorb excess grease and dust. It should be used together with a dry cloth.

Certain points should be considered when cleaning switches.